Synthesis, Crystal Structure and Electrochemical Properties of One-dimensional Chain Coordination Polymer [Co(Ⅱ)(C6H5CH=CHCOOH)2(4,4''-bipy)(H2O)5]n

A one-dimensional chain coordination polymer [Co(Ⅱ)(C6H5CH=CHCOOH)2(4,4'-bipy)(H2O)5]n has been synthesized with cinnamylic acid, 4,4'-bipy and cobaltous chloride as raw materials. Crystal data for this complex: monoclinic, space group P21/c, a - 1.1481(3), b =1.1230(2), c = 1.1759(3) nm, β = 97.054(4)°, V = 1.5046(6) nm3, Mr= 617.50, Dc = 1.363 g/cm3, Z= 2, μ(MoKα) = 0.627 mm-1, F(000) = 646, S = 1.062, R 0.0443 and wR = 0.1178. The crystal structure shows that two neighboring cobalt(Ⅱ) ions are linked together by one 4,4'-bipy, and the whole complex molecule adopts a one-dimensional chain structure. Each cobalt(Ⅱ) ion is coordinated with two nitrogen atoms from two 4,4'-bipy molecules and four oxygen atoms from four water molecules, giving a distorted octahedral coordination geometry. The electrochemical properties were analyzed by combining with the crystal structure.     

溶液酸度和反应温度对CaMoO4薄膜电化学制备的影响

本工作研究了恒电流电化学技术制备CaMoO₄薄膜工艺中，溶液酸度和反应温度对薄膜形成的影响。结果表明，酸度会影响薄膜的生长时间和光致发光特性，在较低酸度沉积薄膜时，容易造成薄膜的团簇生长和不确定相的形成；适当升高反应温度会加快晶粒的生长、提高薄膜的纯度、增加薄膜发射光谱的相对强度。在CaMoO₄薄膜电化学制备工艺中，溶液pH值控制在12.0附近和反应温度控制在60 ℃的左右比较好。     

电化学超级电容器电极材料的研究进展

回顾了电化学超级电容器电极材料的研究进展，并对不同电极材料的储能原理和性能特点进行了简要的阐述。参考文献29篇。     

NOx在固体电解质电解池上的电化学消除

 综述了近年来利用固体电解质电解池消除NO的研究进展．重点总结了电化学消除NO研究体系、电化学消除NO分解机制、O2－在固体电解质电解池中传导的控速步骤、电极种类和形态对NO分解性能的影响以及直流与交流电作用的差异等几个方面的研究结果．在RuO2—Ag—YSZ—Pd电解池上实现的NO选择性分解是迄今为止的最佳结果，500℃下NO的转化率为31．8％，NO的分解活性是O2的分解活性的13倍．该领域今后研究的主要方向是，进一步提高NO分解相对于共存O2离子化的选择性、降低O2－在阴极界面处的传导阻力和探寻可在更低温度传导O2－的新的固体电解质     

一个新颖的二茂铁羧酸混配合物的制备、晶体结构及电化学性质研究

本文以3-二茂铁羰基丙酸(L1)、1，1′-二茂铁二羰基-3，3′-双丙酸(L2)、2，2′-联吡啶胺(dpa)以及Zn(Ac)₂·2H₂O为原料合成了一个结构新颖的混配合物[Zn₂(L1)₂(L2)(dpa)]。X-射线单晶衍射分析表明，该配合物是一个中心对称的双核配合物，并在N-H…O氢键和C-H…O氢键的作用下形成了二维的超分子化合物。采用差示脉冲对该配合物的电化学性质进行了初步的研究。     

尖晶石锂锰氧化物锂离子嵌脱过程的交流阻抗谱研究

用粉末微电极研究了尖晶石锂锰氧化物在不同嵌锂状态下嵌脱锂过程的交流阻 抗图谱，提出了新的等效电路模型。描述锂离子在固体中扩散的Warburg阻抗与累 积或消耗的嵌入电容在Lix MnO4中的x≤0．5时串联，0．5＜x≤1时并联。用提出 的等效电路模型分阶段拟合了实验所得的交流阻抗谱，拟合值与实验值相当吻合， 由拟合结果得到不同电位下锂离子在表面膜中的迁移电阻和电容，界面电荷传递电 阻，双层电容，锂离子在固体中扩散系数和累积或消耗的嵌入电容。     

Multistage Electrochemical Reactions with the Transfer of Intermediates between Near-Electrode Layer and Bulk Solution: Analysis of a Kinetic Model and Computer-Aided Modeling

Kinetic equations for a multistage electrode process complicated by the transfer of intermediates between the near-electrode layer and bulk solution are derived and analyzed. Computer-aided modeling of the kinetics of processes of this kind is performed. Conditions under which the share of diffused intermediates is no longer vanishingly small are determined. Effect of various factors on the individual stages is established. Techniques of processing experimental data for determining kinetic parameters of separate stages are suggested.     

Electrochemically induced formation of organomercury compounds

A procedure for the alkylation of metallic mercury by (dimethylglyoximato)butylcobalt(III) electrochemically generated in the presence of butyl bromide is proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 309–312, February, 1994.     

Process study of thermal plasma chemical vapor deposition of diamond,part II: Pressure dependence and effect of substrate pretreatment

The effect of pressure during thermal plasma chemical vapor deposition of diamond films has been investigated for a pressure range from 100 to 760 Torr. The maximum growth rate in our experiments occurs at 270 Torr for substrate temperatures around 1000°C. The existence of an optimum pressure for diamond deposition may he related to the balance between generation and recombination of atomic hydrogen and carbon-containing active species in front of the substrate. To estimate the concentrations of atomic hydrogen and methyl radicals under thermal plasma conditions, calculations based on thermodynamic equilibrium have been performed. This approximate evaluation provides useful guidelines because rapid diffusion results in a near frozen chemistry within the boundary layer. The effect of substrate pretreatment on diamond deposition depends on the type of substrate used. Two growth modes have been observed-layer growth and island growth of diamond crystals on various substrates. Screw dislocations have been observed in diamond deposition in thermal plasmas, and defects such as secondary nucleations are more concentrated along (III) directions than along (100) directions.     

Properties and Photoelectrocatalytic Behaviour of Sol-Gel Derived TiO2 Thin Films

Titanium dioxide (TiO₂) thin films have been prepared on indium doped tin oxide (ITO) glass by sol-gel dip-coating method. Properties of the films were determined as a function of heat-treatment by X-ray diffraction, scanning electron microscopy and photoelectrochemical tests. The films heat-treated at higher temperatures show better crystallinity and photoresponse. The microscopic structure on the film after heat-treatment is attributed to the incorporation of organic polymer into the precursor solution. The performance of the electrodes treated at different temperature on photoelectrocatalytic degradation of methyl orange was investigated. The effect of applied potential and the ability of the electrode to be repeatedly used in photoelectrocatalytic degradation were also evaluated.